Specification SheetsSpecification Sheets
The Battery Powered Electric Ignition System was developed for use in portable Fire Pits and Fire Tables. With this system and a portable LP gas tank, you no longer need to invest in expensive gas lines and electrical wiring. After installed, a simple flip of a switch and your fire feature will ignite itself, monitor the flame, and relight itself if ever the flame goes out.
The Battery Powered Electronic Ignition System includes the following:
▮ Ignition Control Box
▮ Pilot Burner Assembly (Spark Ignition)
▮ Waterproof Battery Pack (3 AA Batteries)
▮ Rocker Switch
▮ LED Indicator Light
▮ Face Plate (Rocker Switch, LED and Key Valve mounted to Face Plate)
The Submersible Electronic Ignition System (SUBEIS) is the first and only Fire ON Water feature. Designed to be mounted submerged in the water with only the small Pilot Burner visible above the water surface. When in operation tiny gas bubbles drift to the surface of the water and ignite creating a magical flame that dances on the water surface.
Flame / Heat Sense: Thermopile
Ignition Type: Hot Surface Ignition (Glow Plug)
Ignition Sequence: Intermittent Pilot
Ignition Source: Pilot
Max. Btu Output: 512K Btu/hr
Inlet / Outlet Size: ¾” FPT
Operating Voltage: 24 volts ac
Inlet Gas Press. Limit: 2.0 psi
Valve Enclosure Dim: 4 ½″ x 4 ½″ x 5″ (tall)
The AWEIS HC is a slightly larger version of the AWEIS SC in terms of physical dimension but delivers considerably more gas than its smaller counterpart.
With a maximum gas output of 512K Btu/hr – which is a very large amount of gas – it can be used in the larger fire features that require a considerable amount of gas to create the desired effect.
Flame / Heat Sense: Thermopile
Ignition Type: Hot Surface Ignition (Glow Plug)
Ignition Sequence: Intermittent Pilot
Ignition Source: Pilot
Max. Btu Output: 290K Btu/hr
Inlet / Outlet Size: ½” FPT
Operating Voltage: 24 volts ac
Inlet Gas Press. Limit: 2.0 psi
Valve Enclosure Dim: 4 3/8″ x 4 3/8″ x 4 3/8″ (tall)
The AWEIS SC is the smallest Electronic Ignition System for use in Fire Bowls and Fire Pits on the market today. Its small size, especially in height makes it the perfect match for those features that do not have much room in the vertical.
With a maximum gas output of 290K Btu/hr – which is quite a large amount of gas – it can be used in most fire feature applications. For those features requiring even more gas we have the AWEIS High Capacity System.
Flame / Heat Sense: Thermopile
Ignition Type: Hot Surface Ignition (Glow Plug)
Ignition Sequence: Intermittent Pilot
Ignition Source: Pilot
Max. Btu Output: 25K Btu/hr
Inlet / Outlet Size: ½” FPT
Operating Voltage: 24 volts ac
Inlet Gas Press Limit: 2.0 psi
Valve Enclosure Dim: 2 1/2″ x 6 1/2″
The Vulcan Fire Module is the smallest Electronic Ignition System on the market today. Its small size makes it perfect for those ‘very’ small fire features such as small bowls, rock crevices, or other cylinder-shaped fire features. The flame pattern the Vulcan emits is identical to our Tiki Torches as shown in the photo at right.