Why Marine Grade Burners are Better

Steps to Easy Remove an Ignition System when paired with a Marine Grade Burner

1. Clear Away Media

First clear away the media (lava rock) to expose the Access Panels in the center of the burner pan.

2. Loosen Fittings

Using a wrench loosen the threaded fittings that connect the long burners to the center “Gas Inlet” section.

3. Disconnect the Long Burners

Disconnect the long burners from the Gas Inlet section and slide them away from center as shown at right.

4. Remove Access Panels

Remove the Access Panels to expose the Ignition System below.

5. Disconnect Pilot Burner

Reach down through the Access and disconnect the Pilot Burner. Lift the Ignition System up and out of the Burner Pan.